 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Bulletin PD-20826 09/04 10CTQ150PBF SCHOTTKY RECTIFIER 10 Amp IF(AV) = 10 Amp VR = 150V Major Ratings and Characteristics Characteristics IF(AV) Rectangular waveform VRRM IFSM @ tp = 5 s sine VF TJ @ 5 Apk, TJ = 125C (per leg) range Description/ Features Units A V A V This center tap Schottky ectifier has been optimized for low reverse leakage at high temperature. The proprietary barrier technology allows for reliable operation up to 175 C junction temperature. Typical applications are in switching power supplies, converters, free-wheeling diodes, and reverse battery protection. Center tap configuration Low forward voltage drop High purity, high temperature epoxy encapsulation for enhanced mechanical strength and moisture resistance High frequency operation Guard ring for enhanced ruggedness and long term reliability Lead-Free ("PbF" suffix) 175 C TJ operation Values 10 150 620 0.73 - 55 to 175 C Case Styles 10CTQ150PBF Base Common Cathode 2 1 Anode 2 Common Cathode 3 Anode TO-220 www.irf.com 1 10CTQ150PBF Bulletin PD-20826 09/04 Voltage Ratings Parameters VR Max. DC Reverse Voltage (V) VRWM Max. Working Peak Reverse Voltage (V) 10CTQ150PBF 150 Absolute Maximum Ratings Parameters IF(AV) Max. Average Forward Current IFSM EAS IAR * See Fig. 5 (Per Leg) (Per Device) * See Fig. 7 Values 5 10 620 115 6.75 0.30 Units A Conditions 50% duty cycle @ TC = 155C, rectangular wave form 5s Sine or 3s Rect. pulse Following any rated load condition and with 10ms Sine or 6ms Rect. pulse rated V RRM applied TJ = 25 C, IAS = 0.30 Amps, L = 150 mH Current decaying linearly to zero in 1 sec Frequency limited by TJ max. VA = 1.5 x VR typical Max. Peak One Cycle Non-Repetitive Surge Current (Per Leg) Non-Repetitive Avalanche Energy (Per Leg) Repetitive Avalanche Current (Per Leg) A mJ A Electrical Specifications Parameters VFM Max. Forward Voltage Drop (Per Leg) * See Fig. 1 (1) Values 0.93 1.10 0.73 0.86 0.05 7 0.468 28 200 8.0 10000 Units V V V V mA mA V m Conditions @ 5A @ 10A @ 5A @ 10A TJ = 25 C TJ = 125 C TJ = TJ max. TJ = 25 C TJ = 125 C VR = rated VR IRM Max. Reverse Leakage Current (Per Leg) * See Fig. 2 (1) VF(TO) Threshold Voltage rt CT LS Forward Slope Resistance Max. Junction Capacitance (Per Leg) Typical Series Inductance (Per Leg) pF nH VR = 5VDC (test signal range 100Khz to 1Mhz) 25C Measured lead to lead 5mm from package body (1) Pulse Width < 300s, Duty Cycle <2% dv/dt Max. Voltage Rate of Change V/ s (Rated VR) Thermal-Mechanical Specifications Parameters TJ Tstg Max. Junction Temperature Range Max. Storage Temperature Range Values -55 to 175 -55 to 175 3.50 1.75 0.50 2 (0.07) Min. Max. 6 (5) 12 (10) Units C C Conditions RthJC Max. Thermal Resistance Junction to Case (Per Leg) RthJC Max. Thermal Resistance Junction to Case (Per Package) RthCS Typical Thermal Resistance, Case to Heatsink (only for TO-220) wt T Approximate Weight Mounting Torque Marking Device C/W DC operation C/W DC operation C/W Mounting surface , smooth and greased g (oz.) Kg-cm (Ibf-in) 10CTQ150 2 www.irf.com 10CTQ150PBF Bulletin PD-20826 09/04 100 100 10 (mA) 1 125C 0.1 0.01 0.001 TJ = 175C TJ = 125C TJ = 175C 150C Reverse Current - I R 100C 75C 50C 25C 0 25 50 75 100 125 150 Instantaneous Forward Current - I F (A) 0.0001 10 Reverse Voltage - V R (V) TJ = 25C Fig. 2 - Typical Values Of Reverse Current Vs. Reverse Voltage (Per Leg) 1000 T (pF) Junction Capacitance - C T = 25C J 100 1 0 0.5 1 1.5 2 2.5 3 10 0 20 40 60 80 100 120 140 160 Forward Voltage Drop - V FM (V) Reverse Voltage - VR (V) Fig. 1 - Max. Forward Voltage Drop Characteristics (Per Leg) 10 T hermal Impeda nc e Z thJC (C/W) Fig. 3 - Typical Junction Capacitance Vs. Reverse Voltage (Per Leg) 1 D = 0.75 D = 0.50 D = 0.33 0.1 D = 0.25 D = 0.20 P DM t1 0.01 S ingle Pulse (T hermal Resistance) Notes: t2 1. Duty factor D = t 1/ t 2 2. Peak T = PDM x Z thJC+ TC J 0.1 1 10 100 0.001 0.00001 0.0001 0.001 0.01 t 1 , Rectangular Pulse Duration (S econds) Fig. 4 - Max. Thermal Impedance ZthJC Characteristics (Per Leg) www.irf.com 3 10CTQ150PBF Bulletin PD-20826 09/04 180 Allowable Case T emperature - (C) Average Power Loss - (Watts) 5 D = 0.20 D = 0.25 D = 0.33 D = 0.50 D = 0.75 DC RMSLimit 2 170 DC 160 150 140 130 see note (2) 4 3 S quare wave (D = 0.50) 80% Rated V R applied 1 120 0 2 4 6 8 0 0 1 2 3 4 5 6 7 8 Average Forward Current - I F(AV) (A) Average Forward Current - I F(AV) (A) Fig. 5 - Max. Allowable Case Temperature Vs. Average Forward Current (Per Leg) 1000 At Any Rated Load Condition And With Rated VRRM Applied Following Surge FSM Fig. 6 - Forward Power Loss Characteristics (Per Leg) Non-Repetitive Surge Current - I (A) 100 10 100 1000 10000 Square Wave Pulse Duration - t p (microsec) Fig. 7 - Max. Non-Repetitive Surge Current (Per Leg) L HIGH-S PEED S CH WIT FREE-WHEEL DIODE 40HF L40S 02 + DUT IR P460 F R = 25 ohm g Vd = 25 Volt CURR ENT MONIT OR Fig. 8 - Unclamped Inductive Test Circuit (2) Formula used: TC = TJ - (Pd + PdREV) x RthJC ; Pd = Forward Power Loss = IF(AV) x VFM @ (IF(AV) / D) (see Fig. 6); PdREV = Inverse Power Loss = VR1 x IR (1 - D); IR @ VR1 = 10 V 4 www.irf.com 10CTQ150PBF Bulletin PD-20826 09/04 Outline Table 10.54 (0.41) MAX. 3.78 (0.15) 3.54 (0.14) 15.24 (0.60) 14.84 (0.58) 123 14.09 (0.55) 13.47 (0.53) 3.96 (0.16) 3.55 (0.14) 2.04 (0.080) MAX. 1.40 (0.05) 1.15 (0.04) 0.94 (0.04) 0.69 (0.03) 2.89 (0.11) 2.64 (0.10) 0.10 (0.004) 1 1.32 (0.05) DIA. 6.48 (0.25) 6.23 (0.24) 2 1.22 (0.05) Base Common Cathode 2 2.92 (0.11) 2.54 (0.10) TERM 2 Anode 2 Common Cathode 3 Anode 123 4.57 (0.18) 4.32 (0.17) 0.61 (0.02) MAX. 5.08 (0.20) REF. Conform to JEDEC outline TO-220AB Dimensions in millimeters and (inches) Part Marking Information IRXC Assembly Line EXAMPLE: THIS IS A 10CTQ150 LOT CODE 1789 ASSEMBLED ON WW 19, 2001 IN THE ASSEMBLY LINE "C" PART NUMBER INTERNATIONAL RECTIFIER LOGO ASSEMBLY LOT CODE DATE CODE P = LEAD-FREE YEAR 1 = 2001 WEEK 19 LINE C IRMX Assembly Line EXAMPLE: THIS IS A 10CTQ150 LOT CODE 1789 ASSEMBLED ON WW 19, 2001 INTERNATIONAL RECTIFIER LOGO ASSEMBLY LOT CODE PART NUMBER DATE CODE YEAR 1 = 2001 WEEK 19 P = LEAD-FREE www.irf.com 5 10CTQ150PBF Bulletin PD-20826 09/04 Ordering Information Table Device Code 10 1 C 2 T 3 Q 4 150 PbF 5 6 1 2 3 4 5 6 - Current Rating (10 = 10A) Circuit Configuration C = Common Cathode Package T = TO-220 Schottky "Q" Series Voltage Rating (150 = 150A) none = Standard Production PbF = Lead-Free Tube Standard Pack Quantity : 50 pieces Data and specifications subject to change without notice. This product has been designed and qualified for Industrial Level and Lead-Free. Qualification Standards can be found on IR's Web site. IR WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245, USA Tel: (310) 252-7105 TAC Fax: (310) 252-7309 Visit us at www.irf.com for sales contact information. 09/04 6 www.irf.com |
Price & Availability of 10CTQ150PBF
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |